 | Consultancy Services on New Heat Pump Drying Systems |
| Consultancy on established Heat Pump Driers for drying improvement in time
and quality, and improvements in energy efficiency. |
| Conversions for existing non Heat Pump Systems |
| Design and Engineering of complete Drying systems including Feeders,
Conveyors and other ancillary equipment |
| Project management of Drier design and installation. |
| PLC Control and Programming of new and existing Driers. |
| Electrical Design |
| Overseeing of Drier Construction and Commissioning |
Performance Guarantee
Aussie Heat Pump Driers will guarantee that the drying systems will perform
at least to the standard as specified in the initial assessment. This includes drying
quality, product quality and throughput.
Why Heat Pump for Drying
Heat Pumps have many advantages over other drying systems.
Efficiency
Heat Pump Driers work on a closed system. Air is
re-circulated through the drier. Each time it passes, water is removed from
the air and the air is reheated using the heat recovered from the water, and
energy from the compressor/s and fans. No heated air is lost to the
atmosphere, and no extra heat is needed. As Heat Pumps transfer more energy
than is required to run the compressor, (up to 6 times more) Heat Pumps are
extremely efficient.
Not effected by the Environment
Heat Pump systems are a closed system and are unaffected by outside
influences, so problems that plague other types of driers like Cold
Temperatures and High Humidity have little to no effect.
Heat Sensitive Products
Heat Pumps Driers dry from a combination of heat, airflow and low humidity.
As the environment is enclosed and no external moisture gets into the drier,
drying temperatures can be very low, even as low as 20°C. At these
temperatures, the drying ability comes from low humidity and airflow. Products
that are sensitive to heat can therefore be dried without the damage that
elevated temperatures would cause.
Contact Information
Please contact us for information or
a quote. We are available during all business hours. Email, Post or Phone.
Location
Suite 3 / 76 Woodlark St, Lismore, NSW 2480
- Telephone
- +61 403 403 145
-
- Postal address
- Suite 3 / 76 Woodlark St,
Lismore, NSW 2480
-
- Electronic mail
- Contact: info@aussieheatpumps.com.au
